Deck Staining Murfreesboro Fundamentals Explained

The 10-Minute Rule for Deck Staining Murfreesboro

Wooden decks require regular maintenance to help preserve its color, grain, and longevity. All year round, your deck is exposed to rain, snow, sleet, ice, and direct sunlight. It’s important to restain your deck to help prevent the impact that these elements may have on the wood. But as with staining or painting any surface, it’s important to take the necessary preparation and application procedures to ensure you get the protection and the look that you desire.


Although stain doesn’t cover the wood in the same way that paint does, deck stain acts as a barrier between moisture and wood. Water-soaked wood can begin growing mold or mildew, and may also expand and grow soft, causing you to have to replace planks and repair the deck. Many people fall victim to the false notion that sealing a deck with deck sealant will solve all potential wood issues, but cracking is one thing that sealants alone won’t help or prevent.


Using an oil-based stain will help keep necessary moisture in the wood while keeping excess water out, preventing both cracking and moisture buildup or warping. Preparation is key to the final results. All wood needs to be cleaned well before staining, whether it’s a brand new deck, or an older deck that’s been out in the weather and needs to be re-stained.

Some Known Questions About Deck Staining Murfreesboro.

If it’s left un-cleaned, it can prevent wood stains from properly penetrating into the wood surface. On an older deck, dirt, graying from the sun, mildew and old stains all need to be removed prior to staining (Deck Staining Murfreesboro). You should use a deck scrub for the cleaning process. It uses an acidic solvent to kill mildew as well as it helps remove any dirt or grime that has built up.


If there is a build up of old stains on the deck then the job gets a little tougher but not impossible. You can use a stain stripper which will remove most weathered stains in a single application. Lastly, if there are small spots of stain that won’t come off during the cleaning process, they should sand off easily.


If spots of stain are left on the deck, they will show through the new finish and detract from the deck’s final appearance. Allow the deck to dry for one week after cleaning before applying stain. First, it’s important to read the stain can. Every stain can be slightly different, so it is very important that you adhere to the written directions.

Some Of Deck Staining Murfreesboro

So read the label first and you’re likely to get it right the first time. There are a lot of different ways to apply the deck stain. Paint brush and paint roller are the two most popular. Regardless of how you apply your wood stain, keep a paint brush at hand.


The friction caused by a paint brush will cause the wood to absorb more stain. So if you are spraying or rolling the stain, always see it here back-brush it in with a brush while the stain is still wet and you’ll achieve much better penetration in to the wood. Remember…take your time! At Textbook Painting, our professionally trained painters can stain your deck, or take care of your other exterior painting, staining, or powerwashing needs.


Decks can be damaged by the harsh elements no matter how sturdy they seem; one of the best ways to protect your deck is by staining it. Since wood decks need regular maintenance to keep their beauty and longevity, deck staining is an ideal option. Here are some of the benefits of staining your deck: Staining wood brings out the natural beauty of its texture and grain.

The Best Strategy To Use For Deck Staining Murfreesboro

Different tints are also available, which allows you to match your stained deck to the rest of your home while still preserving the wood’s natural appearance. Even if your deck is in a shady spot, ultraviolet light from the sun can still cause damage to it. Untreated wood will warp, crack, and splinter with time.




When it comes to your deck and other exterior wooden structures, it is crucial to ensure these features are properly protected from the elements in order to maintain an aesthetically-pleasing exterior and prolong the life of your investment. In order to keep your deck protected, regular staining is important. Keep reading to discover several benefits of regular deck staining.




However, the duration browse around this site may vary depending on the prevailing weather conditions, or the general climate in your area. To prevent wood rot and other structural damage, regular deck staining is recommended. We recommend reapplying stain to your deck every two to three years, or as soon as you notice any signs of peeling, bubbling, or mold.

Not known Facts About Deck Staining Murfreesboro

Your deck is at that point again and now you’re wondering can you stain over a stained deck or will it make it worse. It can be tempting to simply put a coat of stain or paint on your stained deck and call it a day, but it could cause more problems that’ll be expensive to fix.


If your deck is in good condition and you’re looking to apply a maintenance coat to keep your deck looking new, then yes… you can stain over a stained deck. If this is the case then make sure you use the exact same product as last time. Don’t try to coat your existing stain with a different brand of deck stain.


If it’s not the click here to find out more exact same deck stain as last time, then sand your deck back and start again. It’s the same if the surface of your boards are starting to look really worn and faded. Applying more stain won’t hide the damage. I recommend stripping your deck back, then applying the stain.

Excitement About Deck Staining Murfreesboro

When you start applying colours on top of other colours, the results can be risky… I’ve been called in to fix decks that have had different colour coatings on top of existing stains and it’s resulted in weird dark colours that look like there’s moisture trapped under the surface. Your deck can come out looking blotchy.


Never put stain on a painted deck… Stain needs to absorb into the surface of your decking boards to make sure your deck is protected properly and also so it looks great. Any time you put a coat of stain on top of paint, the paint will stop the stain from soaking into the surface.


It won’t provide any protection for your decking boards. Not only that, the stain won’t mask any blemishes on your deck. It will actually make it look worse - Deck Staining Murfreesboro. So, never stain over a painted deck… Whenever you paint a deck, the most important part is the preparation. If you want the paint to stick to the surface of your decking boards then you need to make sure all previous coatings are removed and the surface is cleaned then primed before you paint.